For models that have an active RIDE COMMAND+ account, you can update your display via Over-The-Air Updates (OTA). When an update is ready, a notification will be displayed on top of the display. Follow these steps when you get said notification:
1.) Connect the bike to a trickle charger. Refer to your Owner's Manual for the trickle charger location.
2.) Tap the notification on the display to access the Update Software menu.
3.) Tap INSTALL in the Update Software menu.
4.) The update will install and the touchscreen will reboot.
For models with the 7" Display powered by RIDE COMMAND, you can update your display via USB.
- For 2017-2019 models, a 4+ GB USB drive formatted in FAT32 is required to perform the update. Follow this step-by-step guide to get started.
- For 2020 or newer models, a 4+ GB USB drive formatted in FAT32 or ExFAT is required to perform the update. Follow this step-by-step guide to get started.
For models with the 4" Display powered by RIDE COMMAND, you can update your display via USB. A minimum 1 GB USB drive is required to perform the update. Follow this step-by-step guide to get started.